The world’s Largest Sharp Brain Virtual Experts Marketplace Just a click Away
Levels Tought:
Elementary,Middle School,High School,College,University,PHD
| Teaching Since: | Apr 2017 |
| Last Sign in: | 103 Weeks Ago, 4 Days Ago |
| Questions Answered: | 4870 |
| Tutorials Posted: | 4863 |
MBA IT, Mater in Science and Technology
Devry
Jul-1996 - Jul-2000
Professor
Devry University
Mar-2010 - Oct-2016
Attached is my assignment for CIT 276 Routing and Switching Management. Â Needing help setting it up
Â
Completethe following tasks using the Toolwire®lab, "Build Your Own Lab in a 4 Router WANTopology":1.Determine and apply the basic configuration on all devices2.Determine and apply the enhance security on switch S1 to meet the following requirements:oEnable port security on the S1 interface to allow only the PC to connect to the switchoViolation action: ProtectoMax MAC addresses: 13.Configure and activate the interfaces on the devices with the IP addresses from your IPAddress Plan4.Configure the PC workstation IP address, subnet mask, and gateway5.Add VLANs and trucking as necessary to S1 to allow VLANs 1, 10, and 20 to yourconfiguration from Week Two6. Use Point-to-Point Protocol (PPP) on the WAN link connecting Core and R4 routers7. Use frame-relay to connect R1 and Core routersConfigure a point-to-point subinterface WAN link from R1 to R2; DLCI = 200Configure a point-to-point subinterface WAN link from Core to R2; DLCI = 2008. Router R2 will be used as our frame switchType the following configuration from global configuration mode on R2:frame switch!interface Serial0/0/0no ip addressencapsulation frame-relayframe-relay intf-type dceframe-relay route 200 interface Serial0/0/1 200!interface Serial0/0/1no ip addressencapsulation frame-relayframe-relay intf-type dceframe-relay route 200 interface Serial0/0/0 2009. Save your configurations on the devices10.. Save your configurations in Toolwire®
Attachments:
-----------