Disable DNS lookup.

Configure device name as shown in the topology.

Assign class as the privileged EXEC password.

Assign cisco as the console and vty passwords.

Encrypt the clear text passwords.

Configure a MOTD banner to warn users that unauthorized access is prohibited.

Configure logging synchronous for the console line.

Configure the IP addresses listed in the Addressing Table for all interfaces.

Set the clock rate for all DCE serial interfaces at 128000.

Copy the running configuration to the startup configuration

 

Lab - Configuring OSFPv2 Advanced FeaturesTopologyAddressing TableDeviceInterfaceIP AddressSubnet MaskDefault GatewayR1G0/0192.168.1.1255.255.255.0N/AS0/0/0 (DCE)192.168.12.1255.255.255.252N/AS0/0/1192.168.13.1255.255.255.252N/AR2Lo0209.165.200.225255.255.255.252N/AS0/0/0192.168.12.2255.255.255.252N/AS0/0/1 (DCE)192.168.23.1255.255.255.252N/AR3G0/0192.168.3.1255.255.255.0N/AS0/0/0 (DCE)192.168.13.2255.255.255.252N/AS0/0/1192.168.23.2255.255.255.252N/APC-ANIC192.168.1.3255.255.255.0192.168.1.1PC-CNIC192.168.3.3255.255.255.0192.168.3.1ObjectivesPart 1: Build the Network and Configure Basic Device SettingsPart 2: Configure and Verify OSPF RoutingPart 3: Change OSPF MetricsPart 4: Configure and Propagate a Static Default RoutePart 5: Configure OSPF Authentication© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.Page1of9

Attachments:

• 1495180425-5.1.5.8 Lab - Configuring OSPFv2 Advanced Features.docx